Read the two drawing references
The small drawing shows 54.07 × 23.77 mm. The large drawing shows 61.34 × 31.59 mm. These are the dimensions indicated on the supplied outlines. Confirm the dimension arrows, units, drawing revision and tolerances with Celsentra before authorising a tool or printing a package.
Compare the curve as well as the span
The large drawing is 7.27 mm wider and 7.82 mm taller on the marked spans. That difference alone cannot predict fit under the eye. Place same-scale paper outlines against your own fit template to compare the inner curve, outer reach and smooth gripping edge.
Check the tray using the selected outline
A tray that fits one crescent can leave too little room for the other size or place a retaining edge over the textured field. Request drawings for each mirrored pair and the corresponding tray. Match sample markings and carton artwork to the size you approve.
Compare the two crescents at actual size
The larger drawing spans 7.27 mm more in width and 7.82 mm more in height than the smaller drawing. Those differences describe the outer envelope. Print both at actual size, check the scale against a ruler and line up the inner tips on tracing paper. Look at where the outer tips and lower arcs fall. Ask the supplier to overlay the textured field as a third outline before deciding whether the larger size covers the area your brand has in mind.
HYTANBIO · Supplier illustrations of eye-patch configurations
Prepare your inquiry
The dimensions identify two drawing references. The approved drawing determines the ordered size.